TKOverKill

This is how I want to pimp up my WA on green gas + RA-Tech NPAS:
[attachment=46]
[attachment=45]

More info to follow...

nice hawk! I can't wait to see it? will it be done before I leave?

well, if i find a buyer for a kidney to get the magpul stock lol

kidding, will see how i find parts...

Stage 1:
I have ordered an SPR Rifle Conversion Kit, which includes top rail and flip-up sights.


Also ordered the new Bomber gas mag for WA which is supposed to hold green gas and test it:
http://airsoftglobal.com/product_info.ph...ts_id=9234

Found a Magpul PRS stock on e-bay for $190, but I would have to change the whole buffer tube assembly (RS size) so this can be done later as well.

Will look something like this (+ a bipod):

---

This is 'da sexy Magpul stock:

http://cgi.ebay.com/Magpul-prs-style-sto...otohosting

Anyone got a U.S. address to get it shipped?

Hey guys, does anybody have access to a lathe?
I need some cut & trimming on an aluminum 20 inch SPR outer barrel...
Any help/advice appreciated!

And finally, the last piece of the puzzle is solved: had to go for G&B 20'' outer barrel that fits both WA hop-up and SPR delta ring. SPR MK12 MOD0 barrel is 18'', so the US Navy Special Forces must forgive my 2 extra inch

It looks like this before assembly:


Any names ideas for when the baby will be born by tomorrow?
ex: WA SPR MK12 MOD-HAWK... lol

Getting closer:

But there's a few things to fix like sanding & grinding, will do them in the morning when rest...

Looks good ! Always better to do the "irreversible" mods when well rested, mistakes happen else...

I picked it up today from Echigoya, all the external mods now completed!
Here are some pics, I will also update with a parts list & to-do internal upgrades:

Now here is the actual parts list, I believe it is not 100% functional yet:
- G&P M4A1 Metal Body set (WP01)
- G&P Knight's Sniper Type Trigger Guard (WP94)
- G&P 20'' M16A2 Aluminum Outer Barrel (WP50)
- G&P Special Forces 100M Silencer BK (GP698B)
- G&P Stock on WA Buffer Tube (6 pos)
- WA Tactical Latch
- WA Hogue M4 Rubber Grip
- Land Arms Rubber Stock Butt
- Magwell Dust Cover, Extensible Bipod
- Pantac-Cordura Cheek Rest BK w/ 7x5.56 spare rounds
- Swivel Ring for 1-Point Sling
- 1 x Bomber Magazine w/ green gas (works fine so far)
- King Arms Leupold M3 Scope Set; Includes: 3.5-10x40 M3 scope w/ IR (red) mil sight, scope rings, QD sight IR (red & green), 'Butler Creek' flip-up covers
- AG-K M16 SPR Rifle Conversion Kit - Long; Includes: mod0 rail sleeve, upper rail guard, front & rear flip-up sights, gas tube, cylinder-type delta ring (had to cut abt. 3mm from it on lathe, did not even fit the set spec)
http://airsoftglobal.com/product_info.ph...ts_id=6017
Honestly, do not recommend it, lots of fitting work required, quality is not the best, but... you get what you pay for...
- All other parts are WA stock.

What do I need to get it skirmish-able?
- Ra-Tech Inner Barrel 510/.03mm probably with hop-up unit, maybe chamber too
- Ra-Tech N.P.A.S. plastic or aluminum... not sure yet
- 20rnd-type gas (short) mags that fit receiver and hold green gas
- ACCU-Wedge piece for eliminating upper & lower receiver wobble (ordered, on its way)

ACCU wedge is here ^^
Just need time to meet up

Yeah, many thanks Brandon
I could visit Zushi for a 'sushi' today... if you have time...

I like, very sexy, looks... BIG though

wow...

Looks a bit 'big' because of the silencer and 20" barrel (aluminum though), but not that heavy at all... Mike was surprised yesterday when he held it, I'd say 5-6 kg with scope, bipod and mag on it...