25-07-2008, 01:30 AM
Ya' know it's a bit sad that I'm more active on Arnies than on my own forums so I better put down some stuff I saw today.
Thanks to Arnie's News (<!-- m -->http://www.arniesairsoft.co.uk/forums/i ... pic=149002<!-- m -->), I decided to go to QRF in Mongkok to check out some new products from Ares. There are 3 new bolties coming up from a pretty much unheard of brand called Ares.
* AMP DSR-1
* PGM mini hecate
* CheyTac Intervention M200
The shop that had samples was called QRF (<!-- m -->http://www.newqrf.com<!-- m -->) and the guy was nice enough to let me take some pics and pics of me too with their new toys.
![[Image: DSR-1PGMM200.jpg]](http://www.tkoverkill.com/gallery/DSR-1PGMM200.jpg)
![[Image: DSR-1.jpg]](http://www.tkoverkill.com/gallery/DSR-1.jpg)
![[Image: DSR-1Close.jpg]](http://www.tkoverkill.com/gallery/DSR-1Close.jpg)
![[Image: M200.jpg]](http://www.tkoverkill.com/gallery/M200.jpg)
All were very well constructed with very good finish. The DSR-1 will be availble around mid-August and retail approx less than HKD$5000. The guy told me there will be two versions, one for JP would be 0.9J whilst the HK version would be 1.2J. Unfortunately the grip's for right-handers only.
I didn't touch the PGM but it looked to be quite a gem too.
Thanks to Arnie's News (<!-- m -->http://www.arniesairsoft.co.uk/forums/i ... pic=149002<!-- m -->), I decided to go to QRF in Mongkok to check out some new products from Ares. There are 3 new bolties coming up from a pretty much unheard of brand called Ares.
* AMP DSR-1
* PGM mini hecate
* CheyTac Intervention M200
The shop that had samples was called QRF (<!-- m -->http://www.newqrf.com<!-- m -->) and the guy was nice enough to let me take some pics and pics of me too with their new toys.
![[Image: DSR-1PGMM200.jpg]](http://www.tkoverkill.com/gallery/DSR-1PGMM200.jpg)
![[Image: DSR-1.jpg]](http://www.tkoverkill.com/gallery/DSR-1.jpg)
![[Image: DSR-1Close.jpg]](http://www.tkoverkill.com/gallery/DSR-1Close.jpg)
![[Image: M200.jpg]](http://www.tkoverkill.com/gallery/M200.jpg)
All were very well constructed with very good finish. The DSR-1 will be availble around mid-August and retail approx less than HKD$5000. The guy told me there will be two versions, one for JP would be 0.9J whilst the HK version would be 1.2J. Unfortunately the grip's for right-handers only.
I didn't touch the PGM but it looked to be quite a gem too.
![[Image: FCJP2-1.jpg]](http://www.tkoverkill.com/gallery/FCJP2-1.jpg)
![[Image: FCJP2-2.jpg]](http://www.tkoverkill.com/gallery/FCJP2-2.jpg)
![[Image: p8020056qn6.th.jpg]](http://img178.imageshack.us/img178/2649/p8020056qn6.th.jpg)
![[Image: p8020059av5.th.jpg]](http://img151.imageshack.us/img151/2797/p8020059av5.th.jpg)
![[Image: p8020057ua4.th.jpg]](http://img217.imageshack.us/img217/9092/p8020057ua4.th.jpg)
